Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Energy Corridor?
Spring replacement in Energy Corridor typically runs $180 – $340 for one torsion or extension spring, including the new spring and the labor to swap it. Most homes here have two springs, so a matched pair usually lands somewhere around $360 – $680 since both are replaced together. Those are typical estimates for this market; the written estimate we give you after looking at the door sets the final price.
Key takeaways
- One spring: $180 – $340. A matched pair: about double, roughly $360 – $680.
- Springs are rated by cycle life, not by how new they look, so both springs in a pair get replaced at the same time.
- At least one spring breaking is the most common reason a door won’t open at all. Give us a call at (855) 337-1190 and we’ll get a free estimate on the books.
- Through spring replacement, we handle the torsion and extension springs on virtually any residential system in the neighborhood.
If your door slammed shut or won’t lift, a spring has failed. Don’t try to open it by hand or force the opener. Stay clear of the door and call a trained technician, because a wound spring holds a large amount of stored force and can injure someone badly in the time it takes to blink. We’ll walk you through what to expect before we ever touch the door.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break out for a typical residential spring job in Energy Corridor. Each range is an estimate, and the written estimate is the price that applies.
| Item | Typical estimated price |
|---|---|
| One torsion or extension spring (parts + labor) | $180 – $340 |
| Matched pair of springs | About double, roughly $360 – $680 |
| Opener repair (if the opener was strained) | $120 – $320 |
| Opener installation (if the opener is worn out) | $250 – $550 |
| Cable repair (if a cable is frayed or unwound) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Panel replacement (if a spring failure damaged a panel) | $250 – $500 |
What drives a spring job up or down comes down to a few things. The door’s weight matters most: a heavy double door uses thicker wire, and a matched pair of those costs more than a light single door. Spring type counts too, since torsion springs over the door and extension springs along the tracks are different parts with different labor. If the openers have been trying to lift a door with a broken spring, the gear and rail take a beating, and that’s when an opener repair gets folded into the same visit. If you’re not sure which system your door uses, we’ll identify it during the estimate. This is one of the reasons it helps to work with specialists who read doors well, and if you want to see how we think about full repairs, look at garage door repair in Energy Corridor.
What Affects Spring Replacement Pricing in Energy Corridor
- Door weight and size. Most single-car doors use a lighter spring, while the wide double doors common on homes in the Energy Corridor’s townhome and single-family streets need heavier springs. Heavier wire means a higher part cost.
- Torsion versus extension springs. Torsion springs, mounted on the shaft above the door, and extension springs, mounted along the horizontal tracks, are different jobs. Torsion replacements usually take more careful measuring and setup.
- Number of springs. A two-spring door is priced as a pair. Springs wear at the same rate, so replacing only the one that snapped usually means coming back for the other before long.
- Condition of the cables and drums. A snapping spring often puts stress on a cable. If one is frayed or has jumped a drum, it’s safer and often cheaper to handle it during the same visit than to book a second trip.
- Opener strain. When a spring breaks, the opener tries to hoist dead weight. Sometimes it survives. Sometimes the gear strips. We check the opener while we’re there so you aren’t surprised a week later.
- Access and clearance. Tight clearance above the door means more careful setup. Clearance and headroom matter more than most people realize, and it affects how long the job takes.
Houston’s heat is the quiet factor on spring life. Garage interiors along this stretch of the Energy Corridor bake through long, humid summers, and heat plus daily cycling is what wears a spring out. A spring that’s rated for a long cycle life still ages faster in a hot garage than in a cool one. That’s part of why the same part can last different amounts of time in different homes on the same street. It’s not about how the door looks, it’s about how many times it’s gone up and down and how hot it’s been while doing it. If you want to read more about the service behind this page, our guide to spring replacement covers what a replacement involves from start to finish.
How to Save on Spring Replacement
Spring replacement is not a place to cut corners, but you can keep the total sensible. A few approaches that actually help:
- Get the pair done together. Replacing one spring and coming back for the second is two visits and two labor charges. Since matched springs wear together, doing both at once is usually the cheaper path overall.
- Catch the warning signs early. A door that’s gotten heavier, a gap in the spring coils, or a thump when it opens all point to a failing spring. Getting it looked at before it snaps avoids damage to the opener, cables and panels that can add to the bill.
- Ask about cycle rating. Springs come in different cycle ratings. A higher-cycle spring costs more upfront but lasts longer. If you plan to stay in the home, it’s worth asking about the trade-off.
- Keep the opener healthy. A worn opener that struggles to lift the door puts more load on the springs. Regular checks on the opener and rollers keep the whole system from failing at once. Our roller replacement page explains how worn rollers add strain.
- Get the estimate in writing. We offer free estimates, and the written estimate is the price. Before you commit, call (855) 337-1190 and we’ll spell out exactly what’s included.
Can I Replace a Garage Door Spring Myself?
No, and it’s not worth trying. A garage door spring holds a serious amount of stored force, and releasing it the wrong way can cause serious injury. It’s one of the few home repairs where the smart move is to call a trained technician. Our technicians have up to 8 years of experience, and they use the proper winding bars and the right technique. If your spring has snapped, don’t prop the door or try to lift it. Call (855) 337-1190 and we’ll schedule a visit and give you a free estimate.
Repair or Replace? When a New Door Makes More Sense
Sometimes a spring replacement is all a door needs. But if the door is old, the panels are dented and bent, and the springs are the latest in a line of failures, a new door can be the better investment. If you’re weighing that choice, our guide to garage door installation covers what to expect. Estimates for a typical new door installation are $700 – $2200, and we’ll tell you honestly whether your current door is worth the repair. We’ll recommend what fits your existing system, not a single brand we’re trying to push.
Why Get Your Springs Serviced by a Specialist
Springs are the part of a garage door system most likely to get declined by general handymen and single-trade outfits, and for good reason. The job needs the right tools, the right measurements and a careful hand. Our trained technicians handle spring replacement in-house, and we work on all eight major garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That matters because if your door has a specific spring, drum or cable setup, we can match it rather than ordering through a third party and waiting.
We also keep parts on hand for common components, so we’re not stuck waiting on a supplier for the everyday parts a spring job needs. Between our opener repair, spring work, panel replacement and full installation, one call covers the whole system. If something else on the door is off, we’ll tell you during the visit so you’re not making a second call. Whether it’s tension on an existing system or info on a garage door opener repair, we’d rather explain it once, clearly, and let you decide.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Energy Corridor?
A single spring replacement in Energy Corridor runs $180 – $340 for typical jobs, and a matched pair usually costs roughly twice that, around $360 – $680. The written estimate sets the final price. Call (855) 337-1190 for a free estimate.
Is it cheaper to repair or replace my garage door springs?
Replacing the springs is cheaper than replacing the door: a pair of springs lands in the $360 – $680 range, while a new door installation is estimated at $700 – $2200. If the door structure is sound and the springs are simply worn, spring replacement is the more cost-effective fix. Call (855) 337-1190 to talk through which makes sense for your door.
Can you come today to fix a broken spring?
Yes, in many cases we can. Spring replacements are a same-day job when the right parts are available, and we keep common components on hand. Call (855) 337-1190 and we’ll give you a realistic arrival window and a free estimate.
Can I replace my own garage door spring?
No, and it’s a bad idea. A garage door spring holds a dangerous amount of stored energy, and releasing it without the right tools and training can injure you badly. Our technicians have up to 8 years of experience with this exact job. Call (855) 337-1190 for a safe, professional replacement.
Do you work on my brand of garage door?
Yes. Our technicians service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor systems, and we handle parts for common components directly. Call (855) 337-1190 and we’ll confirm the setup for your door.
Get a Free Spring Replacement Estimate
If a spring has snapped or your door is getting heavier by the day, don’t wait for the other spring to fail too. We offer free estimates, upfront pricing and same-day service when parts allow, and our trained technicians handle spring replacement in-house on virtually any residential brand. The written estimate is the price, with no surprises. Call (855) 337-1190 today for your free estimate on spring replacement in Energy Corridor, and we’ll get your door back on its tracks.
Pricing reflects the Energy Corridor market as of 2026. Garage Door Repair Energy Corridor offers free estimates – call (855) 337-1190.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Matt Meyer"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Luis Martinez"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Bethany Miller